WAF Custom Subwoofer Tables

September 8, 2020September 10, 2020

Dual 12” Custom Subwoofer Table Black Walnut (Sawmill) / Flat Black Finish

About this Build:

This rustic/industrial subwoofer table is hand built right here in Helotes (San Antonio) TX. We start with steel we source from local steelyards. The wood slabs were sourced from a sawmill in Boerne TX. The wood used in this table are solid “slabs” of wood milled from locally sourced trees. Each wood inlay used in this table is 1 solid piece of wood from a Mexican Black Walnut tree. The steel is hand welded and then sent to a local powder coating shop. Check out the other wood and powder-coating options available.

The subwoofer enclosure hidden inside the table is hand built from Baltic Birch. The flared port tubes are specifically designed to work with the available airspace and the subwoofer(s) that were used for this setup.

Subwoofer & Amp:

We offer a number of different subwoofer & amp configurations. The power ratings range from 500 to 3,600 watts (RMS). We offer dual our own in house brand TT12”, Image Dynamics IDMAX 12 or Sundown Audio SA12 for this size enclosure.

Most of our subwoofer amps include an onboard DSP with an auto EQ system that utilizes a microphone to help end users configure their subwoofer table. Most of the DSPs can also be customized using your mobile device or Windows PC.

NOTE: WE can offer dual 15 and 18” configurations as well.

Black Walnut Slabs & Sawmill Process

Black Walnut Slabs Ready for woodworking

September 10, 2020September 10, 2020

Custom Subwoofer Console Calico Hickory (Veneer) / Hammered Copper Finish

Custom Subwoofer Calico Hickory / Hammered Copper Finish

About this Build:

This modern subwoofer table design is hand built right here in Helotes (San Antonio) TX. We start with steel we source from local steelyards. Each wood inlay used in this table is cut from a veneer plywood. The steel is hand welded and then sent to a local powder coating shop. Check out the other wood and powder-coating options available.

Subwoofer & Amp:

NOTE: WE can offer dual 15 and 18” configurations as well.

Subwoofer Console Table – Calico Hickory

Subwoofer Table – Reclaimed South Texas Pecan

Bottom View of Subwoofer Box

Steel / Leg Building Process

September 10, 2020September 10, 2020

Custom Subwoofer Console Table Pecan (Sawmill) / Flat Black Finish (Reclaimed Wood)

About this Build:

This rustic/industrial subwoofer table is hand built right here in Helotes (San Antonio) TX. We start with steel we source from local steelyards. The wood slabs were sourced from a sawmill in Canyon Lake, TX. The wood used in this table are solid “slabs” of wood milled from locally sourced trees. Each wood inlay used in this table is 1 solid piece of wood from a Fallen (Reclaimed) South Texas Pecan tree. The steel is hand welded and then sent to a local powder coating shop. Check out the other wood and powder-coating options available.

Subwoofer & Amp:

NOTE: WE can offer dual 15 and 18” configurations as well.

Subwoofer Console Table – South Texas Pecan

Bottom View of Subwoofer Box

Saw Mill Process

Steel / Leg Building Process

September 2, 2020September 10, 2020

Dual 12” Home Theater Subwoofer Table South Texas Mesquite / Flat Black Finish

About this Build:

This build was part of a complete interior furniture solution in a rustic home design. This ranch house is sitting on some acreage in the country .

Wood Used:

The table top was inlaid with book matched mesquite slabs obtained form a local saw mill. The sides are also, slabs obtained from the sawmill.

Mesquite lumber is VERY difficult to locate in long pieces due to the growth patterns. Mesquite is a VERY hard wood with a Janka Hardness rating of 2,345 (Oak is roughly rated at roughly 1,300). It also has a VERY high stability rating of .00129 (Oak is ranked at .00365).

Mesquite is very difficult wood t work with and very difficult to obtain large usable pieces. These along with a number of other factors make this wood very expensive.

The subwoofer enclosure hidden inside the table is made from Baltic Birch. The flared port tubes and specifically designed to work with the available airspace and the subwoofer(s) that were used for this setup.

Subwoofer & Amp:

The subwoofer We used to two Image Dynamics IDMAX 12s in this particular build. A little research will show that each sub can easily handle 1,000 watts RMS and provides astounding Sound Quality (SQ) while still providing amazing SPL levels.

The subwoofer amplifier has a full onboard DSP that can be configured via your PC or your Apple device. In addition, an auto EQ system with microphone is also included.

Top View of Subwoofer Table. This is South Texas Mesquite. A book matched set completes the rustic look of this beautiful table.

Close up of the South Texas Mesquite.